Air Cooled Modular Water Chiller with Water Pump
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
|Packaging:||Standard Package for Export Transport|
|Brand:||Amrta or OEM|
|Place of Origin:||China|
|Supply Ability:||400PCS / Month|
Model No.: AW()
Air cooled modular water chiller with water pump features a compact, all-in-one package design. The air cooled water chiller is available with or without an integrated hydronics package in many sizes. If you choose the optional built-in hydronics package, you get an entire modular water chiller with the pump, circuit setter, strainer, required piping and freeze protection to -20°F. For installation convenience, all pump motors offer standard VFD (variable frequency drive) compatibility and most hydronic packages are available with a factory-installed VFD. This packaged design costs less than buying and installing the components individually. The glycol water chiller saves on installed cost due to its rugged base frame. The frame is capable of point loading, which lowers installed cost by eliminating expensive field erected base rails.
● Offices, Hotels, Hospitals, Industry
● Light commercial and residential buildings
Why this choice?
● Very high efficiency with R410A
● Very low noise operation
● R410A scroll compressors
● Advanced control
● Unit with pump and optional buffer tank
● Very compact for outdoor or indoor installation
The master module can work independently or together with up to 16 slave modules.
Modular water chiller units with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
3-phase scroll type compressor, with builtin thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.
Evaporator built with high efficiency shell and tube type heat exchanger, factory insulated with flexible close cell material.
Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.
Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump system unit is completed also with 4-way valve, liquid receiver and one way valve.
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.
Electric panel consist of:
Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
Paddle flow switch;
Metallic filter for hydraulic circuit;
Rubber antivibration mounting;
Heat recovery functions.
|Cooling power input||kW||20.8||31.4||42.1||63.6||84.2|
|Heating power input||kW||20.2||30.6||41||61.2||82|
|Max Input Power||kW||24||35.7||47.7||71.4||95.4|
|Max Input current||A||50||74||97||148||194|
|Cooling Running Current||A||46||68||89||136||178|
|Cooling power input*||kW||2*9.4||3*9.63||4*9.77||6*9.63||8*9.77|
|Heating power input**||kW||2*9.1||3*9.36||4*9.5||6*9.36||8*9.5|
|Type||/||Shell and tube heat exchanger|
|Water flow when cooling||m3/h||11.2||16.8||22.4||33.6||44.8|
|Water flow when heating||m3/h||11.7||17.6||23.4||35.1||46.8|
|Water side pressure drop ***||kPa||46||52||55||52||55|
|Water connection size||DN||50|| 50 ||65||2x50||2x65|
|V type coil||Length||mm||2000||2207||2207||2207||2207|
*** In the nominal water flow condition the pressure drop is between this range.
**** Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a dear field.
Jinan Amrta Air Conditioning Co.,Ltd
AMRTA specialize in commercial air conditioner and cooling system solutions for commercial and industrial use. Our products cover water chiller, Rooftop packaged unit, heat pump and fan coil units etc.
We AMRTA constantly build upon our history of proven innovation with new products and services that improve global comfort and efficiency.
AMRTA offer extraordinarily innovative and exceptionally reliable service, so why would you install anything but AMRTA? Please check our website
- Company Name: Jinan Amrta Air Conditioning Co.,Ltd
- Representative: Haiyan Wang
- Product/Service: Water Chiller , Air Conditioner , Rooftop Packaged Unit , Heat Pump System , Fan Coil , Air Handling Systems
- Capital (Million US $): US$5 Million
- Year Established: 2012
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No. 13788 Century Road, Jinna, Shandong, P.R.China
- Contact Person: Mr. Richard Lee
- Tel: 0086-531-88901036
Premium Related Products